5052 alloy marine aluminium is a professional marine aluminum plate. It is mainly used in yacht hull and hull parts. The 5052 alloy marine aluminium has higher magnesium content than other alloys, so the rust prevention function is very good. This is also a 5052  alloy marine aluminium applied to the hull. important reason. Magnesium has high strength, anti-rust function and corrosion resistance, which can cope with corrosion of seawater and fresh water.

The main processing technology of is through hot rolling production line. Henan Chalco Aluminum has a mature '1 1' hot rolling production line. We will provide customers with 5052 marine aluminum plates of different status according to the actual situation of the hull made by customers.

5052 ship plate is AL-Mg alloy aluminum plate, magnesium is the main alloying element in 5052 alloy aluminum plate, and 5052 aluminum plate is also the most widely used rust-proof aluminum plate. The strength of this alloy is high, especially with fatigue resistance: plasticity It has high corrosion resistance, can not be heat-treated and strengthened, has good plasticity in semi-cold hardening, low plasticity in cold work hardening, good corrosion resistance, good weldability and machinability.
 

The role of chromium in the 5052 aluminum plate is similar to that of manganese, which improves the resistance to stress corrosion cracking, improves the strength of the base metal and weld, and reduces the tendency of weld cracking, but its content generally does not exceed 0.35%.

5052 aluminum plate is mainly used for high plasticity and good weldability, such as transportation vehicles, ship sheet metal parts, instruments, street lamp brackets and rivets, hardware products, electrical enclosures, etc. As a typical rust-proof aluminum plate, it is often used in ship consoles.

Chalco Aluminum 5052 marine aluminium Performance Advantage

1. It has high plasticity, corrosion resistance and is suitable for use in marine environment;

2. The surface of the aluminum plate has no peeling, bubbles, rough surface and local mechanical damage, and the surface of the aluminum plate has no cracks, no corrosion spots and traces of nitrate;

3. The company has 6 semi-continuous casting production lines, 10 continuous casting and rolling production lines, and 44 other large processing equipments, with an annual output of 450,000 tons;